Product Warranty | Product Care Guidelines
Installation Instructions

Congratulations on your choice of an Art Plastics or Bounty Brassware product.

Art Plastics is a proudly Australian owned customer focused supplier of competitively priced high quality plumbing and bathroom fittings. For more than 25 years Art Plastics has been developing innovative products that solve the everyday problems of plumbers.

Bounty Brassware is the trusted name in designer bathroom fittings, combining clever designs with superior quality to enhance your bathroom’s look, feel & function.


Product Warranty

  1. Art Plastics & Bounty Brassware Product Warranty
  2. Warranty Conditions
  3. Warranty Claims
  4. Dispute Resolution

1. Art Plastics & Bounty Brassware Product Warranty

Art Plastics warrants that Art Plastics & Bounty Brassware products will be free from defects for a period of 2 years*.

In addition to this warranty, legislation (including Australian Consumer Law) may give you certain rights which cannot be excluded, restricted or modified, this warranty must be read subject to such legislation and nothing in this warranty has the effect of excluding, restricting or modifying those rights. Read more about Australian Consumer Law at: www.consumerlaw.gov.au

2. Warranty Conditions

This warranty commences from date of purchase or for new buildings on the date of handover. This warranty only applies to defects which have arisen solely from faulty materials or workmanship in the Products and does not apply to other defects which may have been caused or contributed to as a result of, without limitation, the following:

  • The product not being installed by, or under the supervision of, a licensed tradesperson.
  • Accidental damage, abuse, misuse or mistreatment.
  • Abnormal stresses on the Product beyond its designed purpose.
  • The product not being cleaned properly as per our Care Guidelines and / or generally accepted norms.
  • Damage resulting from installation or unapproved modifications.
  • Interference with or attempts to repair the Product http://www.massagemetro.com/shop/ after the Product has been installed.

* Excludes disposable and single use products including test caps and plugs, dust caps etc.

Note: It is the installer/customers responsibility to ensure:

  • The product is not damaged prior to installation.
  • They are happy with their purchase.
  • The product has all of its components.
  • All installation and repair work is carried out by suitably qualified persons.
  • Required maintenance and care is performed.

3. Warranty Claims

If you purchased an Art Plastics or Bounty Brassware item and it is not of acceptable quality or does not match the description, you can return it to the store where you purchased it.

  • You will need to present your proof of purchase (e.g. your receipt).
  • The item will be assessed based on its condition and age – as part of this process the item may be sent away.
  • If the item is determined to have a major failure you are entitled to a refund, exchange or repair.
  • If the item is determined to have a minor failure you are entitled to a repair. If the product is not faulty or has been damaged due to inappropriate use a refund, exchange or repair will be refused.

If at any time you are not satisfied with the store’s remedy in relation to your statutory rights or those offered by this Warranty then contact Art Plastics directly for assistance.

Email – [email protected]
Phone – 02 9896 7760

4. Dispute Resolution

If at any time you feel that your rights are not being satisfactorily observed by the store or our distribution agent then you may escalate your dispute in writing to:

The General Manager
PO Box 610
Wentworthville NSW 2145
Fax: 02 9636 2498
Email – [email protected]

» Download Product Warranty document.

Product Care Guidelines

1. Introduction

Art Plastics and Bounty Brassware products are manufactured using carefully chosen materials to provide good looks and durability, whilst also complying with the appropriate Australian Standards. Treated with care, our products will offer many years of trouble free service. In order to preserve appearance with minimum effort, we offer the following advice. These recommendations are intended to assist you and are based on our experience and judgment but must not be regarded as amounting to a legal warranty or liability on our part.

2. Environmental Attack

This is caused by chemicals and particles that are present naturally in the air or are caused by activities that release these into the air. The chemicals and particles http://www.buyantibioticshere.com settle on surfaces and can cause irreversible damage. Areas of high exposure and thus high risk would include those near to the sea, mining activities, high traffic-flow, etc. Particular activities such as fumigation, building activities, chemical leaks, etc. can also cause high exposure. If you live in an area of high exposure or have an incident that causes high exposure you may need to clean more regularly.

3. Cleaning

  • Electroplated brass finishes should only be cleaned using a soft cloth and a warm soapy water solution. Surfaces should then be rinsed with clean water and finally dried with a clean soft cloth.
  • Avoid using strong chemicals (containing Chlorides, Citric Acid, Acetic Acid or other corrosive substances), abrasives cleaners and scourers.
  • Polishing of Stainless Steel products is recommended utilising any of the commonly available Stainless Steel polishes.
  • Chemicals used in the construction process such a Hydrochloric or Muriatic Acid (used to clean tile grout or masonry) that come in contact with Stainless Steel or Electroplated Brass will cause damage and void the product’s warranty.

4. Product Care Inquiries

For any Product Care Inquiries:

Email – [email protected]
Phone – 02 9896 7760

» Download Product Care Guidelines.

32/40mm Bottle Trap Installation Instructions

  • The Bounty Brassware Bottle Trap can be connected to either a 32 or 40mm plug & waste with the use of the 32 x 40mm Adapter [1] included.
  • The outlet connection of the Bounty Brassware Bottle Trap is designed to connect to 40mm DWV pipe.

  1. Apply a lubricant (O-ring lubricant or similar) to the 40mm DVW pipe and the rubber washer[6] inside Outlet Connection Cover Flange[5] to achieve an easy fit.
  2. Cut the 40mm DWV pipe to ensure 0-10mm of pipe is protruding from the finished wall or back of vanity cabinet. The pipe should be cut square and chamfered / deburred.
  3. To measure the length of the Outlet Tub[4] to be cut attach the Bounty Brassware Bottle Trap to the P/W and insert the Outlet Tube[4] into the 40mm DVW pipe. Mark the point of entry. Remove the Outlet Pipe[4] and add 30mm for the Rubber Seal[7].
  4. Push the Outlet Connection Cover Flange[5] assembly onto the Outlet Tube[4]. Next push on the Rubber Seal[7]. Lubricate the Rubber Seal[7].
  5. Push the Outlet Tube[4] into the 40mm DVW pipe until the shoulder of the Rubber Seal[7] is against the pipe. Slide the Outlet Connection Cover Flange[4] over the 40mm DVW pipe until it is flush against the wall.
  6. Connect upstream end of outlet tube to the Bounty Brassware Bottle Trap and then reconnect the Bounty Brassware Bottle Trap to the P&W.
  7. Use the adjustable inlet tube[2] to set the height of the Bounty Brassware Bottle Trap to achieve sufficient fall in the outlet tube.
  8. Tighten all compression nuts[3] and water test to ensure there are no leaks.

NOTES:

Cleaning: Electroplated brass finishes should only be cleaned using a soft cloth and a warm soapy water solution. Surfaces should then be rinsed with clean water and finally dried with a clean soft cloth.
Installation: Bounty Brassware Bottle Trap should only be installed by (or in the presence of) a qualified tradesperson.
All fittings are designed to be hand tightened only.